Three reasons why small batch brewers and wine makers buy Minibrew fermenters: Less work, less expensive, and more fun.
Now you can make your favorite beverage with professionally designed equipment. Beer or wine, you'll be happy you joined the "Small Batch Gang." The flavor is up to you. Our inert polyethylene plastic will not change the taste.
Easy to Clean and Sterilize All popular cleaning and/or sterilizing agents can be used on our plastic (HDPE) fermenters. They will not harm the inert plastic material. Water at 180 degrees is an excellent sterilizing agent; pour it down the sides of the fermenter. The heat will sink into the plastic and all the parts, killing bacteria. This procedure works with stainless also. The large top makes it easy to get inside and scrub dried trub with a Teflon scouring pad. The melting point of plastic is 250 degrees.
No Scratches Worries One need not worry about tiny scratches in plastic or stainless. There are two answers to the problem and both are easy. The first is to do nothing. Sterilize with hot water. The second is to remove the scratch by cutting down the sides with a dull knife. Draw the blade toward you, scraping away the plastic. Grinding and buffing scratches in stainless steel is more complicated.
No Secondary Transfers No need to transfer wort or wine to a secondary fermentation vessel. It is safer and less work to transfer the lees and dead yeast cells from the bottom while you leave the fermenting process above untouched.
Fermenter Design and Shape The precise shape of the 60 degree cone and top cylinder (one unit wide by one unit high+) are fermenter design perfections developed over the years by dedicated brewers looking to improve taste, consistency and ease of use. The shape positions the yeast and convection does the rest. The mixing motion of the currents assures complete yeast wort contact. The yeast near the cool sides will sink and, upon hitting the conical bottom, is forced into the center where it is warmer. Active yeast tends to give off heat. The hard working warmer cells rise to the top and spread to the sides to complete the cycle. Dead yeast cells will drop to the bottom and are removed quickly and easily (about 30% are alive) for disposal or reuse.
Precise Temperature Monitoring Thermometer threads on the MiniBrew System brand of fermenters are located near the middle of the wort for precise temperature monitoring. A screw-in plug is included. Two different HBE thermometers are available and sold separately.
Valves included The 1/2" racking port threads are located on the side cone just above the settled yeast level. The port valve is for sampling, specific gravity reading and, of course, racking to bottles and kegs. The valve at the apex of the cone is for filling the fermenter and draining dead yeast. The thickest of yeast will flow through this large valve.
ALL THIS without lifting a carboy, siphoning risk or breaking glass. Now small batch brewing is easy and professional. Carboys, plastic buckets, converted kegs and stainless are history. They just do not provide the benefits, flexibility, ease of use and low cost.
This fermenter ships ready to brew and is our best design for 10 gallon recipes. Included are a 1" bottom ball valve, 1/2" racking port ball valve, lid, stand plus three 1/2" screw in plugs. There are two threads in the lid and one below the label for a thermometer. The thermometer is not included. The plastic is a full 5/16" thick. The fermenter is 44 1/2" tall x 18 3/4" wide. Ships in one oversize box
Our deluxe wine making equipment and supplies kit includes all you need in order to make six gallons of wine. Our wine makers have hand selected each item for quality...
S-Lock with dust cap. Does not include drilled stopper (shown).
Straining Bag 12″ × 19″ fine mesh. Perfect for steeping grains or lots of hops.
Drilled Rubber Stoppers # Top (in) Bottom (in) 2 3/4 5/8 3 15/16 3/4 6 1 1/8 1 1/16 6.5 1 3/8 1 1/8 7 1 17/16 1 3/16 7.5...